49-GC Export

Export Views to NWC and DWG

Dynamo Player Options
String to filter View name on
Select which Views to export to NWCs

Export may take a long time, so make sure your RVT is saved before running the graph in case the Revit process needs to be killed to save time.

Results

Video


NB: A Navisworks NWC Export Utility needs to be installed from https://www.autodesk.com/products/navisworks/3d-viewers for the graph to work.

Download Navisworks NWC File Export Utility

NWC format is also useful for online viewing with Autodesk viewers:

48-Export Wire Pull Schedule

Export Wire Pull Schedule

Inputs

Takes data from two schedules, attempts to find intersections between Conduit and Jboxes, and makes an Excel spreadsheet.  

Inputs:

Make a blank spreadsheet in Excel for the initial Excel File Path input.

Circuiting colors are assigned by 3 options set in the Circuit Color Option Number input slider (1, 2, or 3) E.G.:

Color Circuit Breakdown
Color Circuit Breakdown
Color Circuit Option 1
Color Circuit Option 2
Color Circuit Option 3

An “H” in the PANEL NAME indicates that it is 277V.

The CIRCUITING INFORMATION “CI#” should be an integer between 1 and 126 or blank.

Wire is specified by an input string.

Video Demonstration

46-Set Conduit Run ID Sequence

Set Conduit Run ID sequence by selecting an Electrical Fixture to extract its Mark, then selecting conduits to set their Comments to the Mark value plus a series. It also sets the Comments of all the elements in each Conduit Run. Tagging the selected Conduits is optional.

Before
After

Dialogs

Can add a suffix .# or leave it at 0 for none
Directions to select in order appear when the top button is pressed
After hitting ESC hit the Set Parameters button

Known Issue: If single Conduit (no connected fittings) are selected, there may be some instability setting Parameters.

Video Demonstration

43-Conduit Between Two Fixtures

Model Conduit between two Electrical Fixtures.

In the Dynamo Player inputs, select 1st & 2nd Fixture, and how you want them connected. Connect directly goes straight from the 1st connector to the 2nd, the X/Y options are for going around corners.

Last Dialog Selections file is a small CSV that saves the previous dialog inputs.

“Comments” parameters for the Conduit Run will be set from the “DEVICE ID” from the first fixture selected.

In the dialog box, select which connector to use from each fixture…
…and which conduit Type and click Model Conduit button
Optional show results dialog

Video Demonstration